tl;dr

We introduce the notion of adding a per-token decoder bias to SAEs. Put differently, we add a lookup table indexed by the last seen token. This results in a Pareto improvement across existing architectures (TopK and ReLU) and models (on GPT-2 small and Pythia 1.4B). Attaining the same CE loss is generally 8x faster across GPT-2 small layers, allowing the training of strong SAEs in a few minutes on consumer hardware.
This change is motivated by the presence of a strong training class imbalance, where training data includes local context (unigrams/bigrams) more often than specific global context. Consequently, the SAE is inclined towards learning this local context through "unigram reconstruction" features (features that seem to fire almost exclusively on a single token).
Such features constitute a significant portion of features in public SAEs. We study this phenomenon through the lens of "token subspaces", parts of the activation that encode its original token. Even in complex models such as Gemma 2B, we find these to be a salient part of residual activations.
The proposed lookup table 'hardcodes' these token subspaces and reduces the need to learn these local features, which results in more interesting/complex learned features. We perform a blind feature evaluation study and quantitative analysis showing that unigram-based ("simple") features are much less frequent.
For some interesting results about token subspaces, see our Motivation. To skip to feature quality, see Feature Evaluation. For those interested in training SAEs, skip to Technical Discussion.
We also publish the research code and simplified code of Tokenized SAEs and a dataset of the most common n-grams in OpenWebText (used in Motivation).

Introduction

Sparse auto-encoders (SAEs) are a promising interpretability method that has become a large focus of the mechinterp field. We propose augmenting them with a token-based lookup table, resulting in rapid, high-quality training. Specifically,

We refer to any lookup-table infused SAE as Tokenized SAE or TSAE for short. Adding this lookup table to recent SAE architectures achieves lower CE loss and MSE at any L0.
We observe that LLM residual activations are often biased toward their final token’s subspace (i.e. the activations generated by that token). Therefore, we train a per-token vector lookup table alongside the SAE, summing the lookup vector with the SAE decoder result. This is achieved without changes to the SAE encoder, and the SAE decoder is only affected when reconstruction is desired.
We show that incorporating this lookup table improves training time, produces fewer "simple" (unigram-based) features, and results in interpretable features similar to existing SAEs.

Motivation: Residuals ~ Unigram Residuals

To rationalize adding a per-token vector, we will experimentally show that:

LLM residual activations are highly similar to those of their last n tokens; and
Existing SAEs contain many features that encode unigram residual activations.

n-grams Strongly Approximate Residual Activations

To predict the next word in a sentence, the preceding few words often are most important. Similarly, an LLM's residual activations have strong cosine similarity to that of their last n-gram. In other words, we compare activations of an input sequence [BOS, <tok1>, ..., <tokN>] to that of solely its last-token unigram [BOS, <tokN>]^[1].

Regardless of model complexity and layer depth, we find a consistently strong cosine similarity between these (in fact, the last token is very often the most similar^[2]):

Tokenized SAEs are motivated by observing that residuals of [BOS, <tok1>, ..., <tokN>] are well-approximated by those of the unigram [BOS, <tokN>]. We show that this holds even for complex models such as Gemma 2B. The dashed line shows mean residual cosine similarity to a control unigram (the first token). The dotted line shows similarity to the last token, and the solid line shows that of the most similar unigram. (Note that Gemma has ~256K unigrams, while the others have ~50K.)

This similarity increases with n as more context becomes available. For example, in gpt2-small we find that trigrams often provide a good approximation of the full residuals:

For a fixed 92-token news prompt, we find the cosine similarity between the pre-layer residuals and that of the last n tokens, n=1 to 3. We find that trigrams are typically an adequate approximation throughout the circuit in GPT-2 small. This plot generally holds, we opted to show a single example to highlight the variance between tokens.

Therefore, residual activations are often very similar to those of their last few tokens. We hypothesize this is a large factor why SAE features often activate on and reconstruct particular tokens or token sequences.

Importantly, we do not claim that the n-gram reconstruction achieves similar CE loss or accuracy (which it doesn't). It is only a suitable approximation in terms of MSE, the SAE covers reconstructing the essential missing parts.

A Training Imbalance Biases SAEs Toward Local Context

Sparse auto-encoders may be additionally biased toward local context due to a strong training class imbalance^[3]. During training, short n-grams are exponentially over-represented, leading the SAE to memorize them more precisely.

The precise imbalance is proportional to the training set token frequency^[4]. By counting how often particular n-grams occur in OpenWebText, we see that about 2000 n-gram representations are presented to the SAE in a potential ratio of >1M to one:

Within six-billion OpenWebText tokens, many 1-6 n-grams occur at a ratio of >1M:1. This over-representation likely biases SAEs to most strongly memorize these specific n-gram representations.

In a typical classifier such as logistic regression, a major training class imbalance leads to the model memorizing the most prevalent class via model biases. We find this also occurs in SAEs, which is essentially a set of logistic regressors trained in tandem.

In SAEs, each common token results in a well-defined subset of features to strongly activate. These subsets are clearly visible by presenting common n-gram residual activations to the SAE:

In the RES-JB SAE (layer 8), we observe that the most over-represented unigrams result in strongly-activated, small subsets of well-defined features. Together, their weights and biases strongly memorize the most common residuals.

This results in the SAE hidden layer effectively modeling the most common n-grams:

Each common n-gram is over-represented during SAE training. This causes small subsets of well-defined features to strongly memorize the most common latents through their weights and biases.

This implies that observing which unigrams (or common bigrams/trigrams/etc) activate a given feature is often predictive of which tokens the feature will activate on in longer prompts.^[5]

This also implies that the latent reconstruction MSE is inversely correlated with training set token frequency:

The most common tokens in the training set result in activations reconstructed more exactly by SAEs, even in late layers. This is an expected finding with a training imbalance.

A similar correlation also exists for common bigrams but is not as prominent. We hypothesize this is because the most common bigrams are composed of the most common unigrams, hence they are already in the subspace of the last token:

The 92K most common bigrams in the training set also show better reconstruction MSE with training set frequency. Because the number of possible bigrams is large, we only display those with > 10000 occurrences (in ~9B tokens), corresponding to the ~midpoint of the prior unigram MSE graph.

We found that in later layers, more SAE features activate to common bigrams than unigrams. In fact, many later-layer features do not respond to any short n-gram (e.g. ~24% in RES-JB layer 8). This is potentially because the most common activations at that point are no longer unigram-like, but are a result of non-local information averaged by attention.

The Tokenized SAE: Adding a Lookup Table

SAEs are trained to reconstruct latent representations, applying L1 regularization to encourage sparsity. The resulting SAE hidden layer ("feature") activations are observed to correlate with interesting patterns in the prompt.

We have experimentally demonstrated the importance of the last-token subspace, both to the model and SAEs. Because we can estimate this direction in advance, we can add it to the SAE decoder, stored in a lookup table . In practice, we initialize the lookup table with unigram activations and allow the training procedure to learn them from there.

We hypothesize this will improve training speed and remove "simple" (unigram-based) features. Conceptually, Tokenized SAEs are straightforward; they are identical to an ordinary SAE, except for this token-specific lookup table. This amounts to the following in a standard SAE:

$f (x) = σ (W_{e n c} (x - b_{d e c}))$

$^x = W_{d e c} (f (x)) + b_{d e c} + W_{l o o k u p} (t)$

Here, $x$ represents the input activations at a certain point in the model for a certain token $t$ . $W_{l o o k u p}$ is a matrix where each row corresponds to the bias for a specific token. Implementing this addition in the forward code of the SAE itself is trivial (i.e. incorporating the term only with the decoder).

Just for emphasis, this technique can be applied to any architecture. In the final SAE, no change is necessary to the encoder math. The lookup table is only required if it is desired to reconstruct the activations.

Tokenized SAE Evaluation

We will now quantitatively and qualitatively examine the results of adding the decoder lookup.

Pareto frontiers.
Quantitatively measuring "simple" features.
Qualitative rubric and feature comparison.

Quantitative Results

Reconstruction

We start with the ubiquitous Pareto plot for all tested SAEs on GPT-2 layer 8. We trained on more than 300M tokens to the point all metrics no longer meaningfully decreased. We measure the NMSE (MSE divided by the L2 norm of the target) and CE added (% of increased CE loss).

Next, we show the CE loss across layers on GPT-2 small, using a TopK SAE as the baseline. These SAEs all use k=30. The MSE follows a similar pattern.

The TSAE is better by a fair margin across all layers. This also shows that the TSAE reconstruction does not deteriorate with depth (relative to the baseline), as one would expect. In the Motivation section, we showed evidence that in larger models and later layers, residuals are still very similar to unigram residuals. Toward this, we generated TopK TSAEs for Pythia 1.4B layers 12, 16, and 20. Despite being undertrained (70M tokens), the training progression shows no signs of the baseline "catching up". Here are the CE added for k=50 (the NMSE exhibits similar improvement):

	12	16	20
Baseline	0.076	0.081	0.155
Tokenized	0.045	0.055	0.121

Again, TSAEs achieve considerably lower reconstruction and CE. We did not micro-optimize any hyperparameters, choosing one consistent value across all experiments.

Training Dynamics

Beyond tokenized SAEs beating their baselines in most regards, we specifically wish to highlight their training speed. The following plot shows the speedup gain, measured by taking the final value of a given metric for TopK SAEs and then looking at which point TSAEs crossed that threshold. We then show that fraction.

This speedup is huge across the board (and even increases by depth). This brings training times for competitive reconstruction down to mere minutes. We believe this to be the main advantage of tokenized SAEs; they provide a way to train full suites of SAEs within the hour, which can be handy for circuit analysis.

Overhead

Computationally, we found tokenized SAEs to have a 5% overhead (excluding gathering activations) on a GTX 4080 compared to an ordinary TopK SAE. We expect this could be mostly optimized away through some low-level implementation tricks.

In terms of memory, the lookup table is a large constant factor that tends to dominate small SAEs. Our SAEs on GPT-2 use an expansion factor of 16; the lookup table triples the total size. We wish to stress that SAE size is generally not a constraining factor, loading our SAEs for each layer of the residual amounts to 3GB of memory. However, if this is an issue one can probably get away by only considering a lookup table for a subset of common tokens. We haven't yet looked into what the impact is of such a change but expect it's possible to get away with only using the top half of the most common tokens.

Dead features

One current deficiency of TSAEs is that they generally have more dead features. This ranges from twice as many dead features as TopK to the amount being almost the same. The layer 5-10 gpt2-small TSAEs resulted in 10%-50% dead features, decreasing with layer.

We haven't yet determined the cause (beyond the obvious) or tried any techniques to resolve this. A promising approach would be to use the auxK described here. If this were solved, we believe both training times and final loss to decrease.

Because we pre-initialize each feature with the encoder and decoder weights transposed, an interesting finding is that dead features correspond nearly exactly to features with high cosine similarity between each feature's encoder and decoder. This can be used post-facto to detect dead features:

Dead features are evidenced by high cosine similarity between encoder and decoder weights, since they were pre-initialized as transposes. Here, we show these groups correspond nearly exactly to low test set activations (in gpt2-small layer 5 TSAE).

We examined the high-similarity group using four metrics, concluding they are likely not valid features:

Nearly all are completely dissimilar to RES-JB features (< 0.2 MAX similarity).
Nearly all have a top activation < 3 (Gaussian distribution about 0).
Nearly all are rarely (<1-10%) in the top 30 activations. (However, nearly all features w/ <0.85 similarity are sometimes in the top 30.)
Manually looking at the activations, the features are often difficult to interpret.

Measuring "simple" features

First, we define "simple" features as unigram-based. To measure whether features detect these (or represent them), we can determine the cosine similarity between the feature encoder/decoder weights and unigram activations. In doing this, we discover that the tokenized version of TopK SAE substantially lacks unigram representations in comparison in GPT2-small layer 8:

The cosine similarity of the encoder weights is lower since the decoder tends to represent directions existing in the activations while the encoder performs a somewhat fuzzy match. This leads to a mean cosine similarity of ~0.2-0.4, which may be lower than assumed. However, keep in mind each feature likely must handle quite a bit of noise and therefore doesn't want to match too strongly.

In terms of the decoder, in GPT-2 the cosine similarity between two closely related tokens (eg "cat" and "Cat") is generally between 0.5 and 0.8. We find that most unigram features learn these features at once, leading to a similarity of ~0.4 on average.

A second way to measure "simple" features is by measuring how many features still strongly activate^[6] with only the last n tokens. If the feature still strongly activates with the last two tokens, for example, this perhaps implies the feature may not represent the earlier context.

Therefore, we measure the minimum n that causes (a) a positive activation (indicating perhaps the start of an increasing sequence), and (b) is within 90% of the maximum activation (indicating a strong encoder weight similarity of the input). ^[7]

The results re-affirm that unigram features are less prevalent in tokenized, and they show that TSAEs nearly always have a larger percentage of complex features at every n > 2:

A larger percentage of features in non-tokenized SAEs are "unigram based" (n = 1), while TSAEs generally have more ”complex” features for n > 2. We measure feature complexity by finding the minimum suffix n-gram of each top-activating feature. To avoid dead features, we include features with top activation > 10. The y axis shows a log-scale percentage of these features (0-100%) for the minimal-length suffix required to achieve first positive activation (left) and 90%-of-max activation (right). Layer 5 (top) achieves positive activations entirely with small n < 10 compared to layer 10 (bottom).

Qualitative Results

Feature Quality

We measure the perceived quality of features in comparison to our baseline SAEs and RES-JB according to Cunningham & Connerly (2024) ^[8]. We manually score 20 features from standard and TopK SAEs, with tokenized variants denoted with an asterisk. We rank complexity from 1 (unigrams) to 5 (deep semantics), and consistency from 1 (no discernable pattern) to 5 (no deviations). Note these results should be interpreted cautiously due to the limited sample size:

	RES-JB	Standard	Standard*	TopK	TopK*
Consistency	4.1	3.6	3.4	3.4	4.2
Complexity	2.5	1.1	2.9	1.7	3.0

To illustrate this further, we provide a subjective categorization of the first 25 features of the TopK Tokenized SAE. Our purpose is not to over-generalize, but to demonstrate that TSAE features seemingly have complexity:

Overall thematic: 16 (movie storylines)
Part of a word: 10 (second token), 12 (second token), 17 (single letter in a Polish word), 19 (”i/fi/ani”)
Thematic short n-grams: 15 (” particular/Specific”), 23 (defense-related), 28 (”birth/death”)
N-grams requiring nearby period/newline/comma: 7 (”[punctuation] If”), 18 (”U/u”), 22 (”is/be”)
Bigrams: 2 (”site/venue”), 6 (”’s”), 8 (”shown that”/”found that”/”revealed that”), 14 ([punctuation] ”A/An/a/ The”)
Categoric bigrams: 13 ([NUM] ”feet/foot/meters/degrees”)
Skipgrams: 1 (”in the [TOK]”), 21 (”to [TOK] and”)
Locally Inductive: 11 (requires a sequence of punctuation/short first names)
Globally Inductive: 24 (activates only when final token earlier in the prompt)
Less Than 10 Activation (implies low encoder similarity with input^[9]): 0, 4, 5, 9
Unknown: 3, 20

To show the feature breadth, we have included additional interesting features in the footnotes^[6].

Feature Complexity Measures

We hypothesize that tokenized SAEs reduce the number of "simple" features which activate primarily on the final token. We approximate this using the following method ^[7].

First, we measure how many tokens are directly activated by features. If a feature is only activated by a few tokens, its decoder is more likely to reconstruct that token exactly (making it somewhat of a "feature reconstruction token", which we describe as a "simple" feature).

We see that individual tokens are rarely represented in small tokenized SAEs, while "simple" features are perhaps overly prevalent in large ones:

For increasing SAE size, we measure the percentage of token unigrams [BOS, <tok>] that strongly activate (>5) 0-50+ features. We consider features activated by relatively few unigrams to be "simple", since the activated features likely reconstruct them directly. We see that in small SAEs unigrams activate few features overall, while in large SAEs simple features become overly prevalent.

Technical Details

Now, we will share some details for effectively training tokenized SAEs. This section may be more technical than others.

Caching Tokens

SAEs have three modi operandi: training, activating, and reconstructing. We'll now examine how the lookup table affects each.

Generally, SAEs are trained by sampling (collecting) activations into a big buffer and shuffling those (to remove the context dependence which may lead to micro-overfitting and consequently unstable training).

During training, the original token labels are usually discarded. Caching these tokens shouldn't be difficult; afterwards, they can be passed into a normal DataLoader that yields (x, y) pairs. The memory (or any other kind of) overhead is negligible.
Next, collecting activations from an SAE only requires an encoder. This is completely identical for TSAEs, no need for any changes.
Lastly, reconstructing activations requires the original tokens. This is likely the most cumbersome change since current implementations such as TransformerLens discard this information. However, if implemented manually, this can be easily fixed by passing the token information into the SAE reconstruction hook.

Initializing the Lookup Table

SAE encoders are often initialized to the transpose of their decoder, aiming to approximate an identity operation. Anecdotally, this has a large positive impact on convergence speed but also the converged reconstructions.

Similarly, we found that a properly initialized lookup table significantly helps training better SAEs. To achieve this we use unigram reconstructions (explained above). They provide a good baseline for the SAE features to build upon.

One can imagine taking other approaches, such as taking the mean of activations for each token over a certain dataset. We haven't performed a rigorous ablation to test this. Our intuition of using unigram reconstruction (including attention sink) over the alternatives is that there is less noise that may be somehow pathological or otherwise biased. In that sense, we are choosing the "purest" token reconstruction baseline.

Furthermore, instead of using the exact initialization described above, we've found that it's important to "balance" the lookup table and the SAE itself. We do this by setting $W_{e n c} = (1 - α) W_{d e c}^{T}$ and $W_{l o o k u p} = α W_{u n i g r a m}$ . This $α$ can be interpreted as "how much token subspace we predict there to be". Clearly, an optimal value will depend on model and depth but we've found that, somewhat surprisingly, a value of 0.5 is almost universally optimal (or at least a very good guess) ^[10].

During training, we measure the evolution of this balance via the lookup table. We measure the following (scale-aware) cosine similarity:

$^α = \frac{W_{l o o k u p} \cdot W_{u n i g r a m}}{| | W_{u n i g r a m} | |^{2}}$

For SAEs on the residual stream of GPT-2, this $^a$ varies from 0.6 (layer 5) to 0.5 (layer 11). In Pythia 1.4b we did not do a full ablation but it settled at 0.43 on layer 16.

There is no guarantee that $^α$ will reach the "optimal" value for any start $α$ . For instance if $α = 0$ , then $^α$ may converge towards 0.3. However, if we start another run with $α = 0.3$ , then $^α$ rises towards 0.5 (with better loss metrics). This indicates that the SAE struggles to find good optima on itself for the lookup table.

Learning the Lookup Table

One potential pitfall in implementing TSAEs is that the learning rate of the lookup table should be higher than the SAE itself. At first, it may not seem obvious why given we use lookup tables all the time. The difference is that we're summing them, not chaining them.

When using TopK SAEs, it's more easily understood. Since k features are active at a time, on average, each SAE feature will be updated k times more than the lookup table features. Empirically, we found that setting the lookup learning rate higher (more than scaled by k) yields better results. We believe this to be due to a combination of the token bias being more stable, dead features (resulting in some features being updated much more) and varying token frequencies.

PyTorch's embedding class also allows dynamic learning rates according to entry frequency (tokens in our case). We didn't try this, but it may further improve learning a correct lookup table.

Discussion

While TSAEs may not seem like a big change, they require a slight adaptation in how we think about SAEs. In this section, we cover TSAEs from two angles: discussing some possible criticisms of this approach, then outlining some more optimistic outlooks.

Devil's Advocate

There are some weaknesses to the proposed approach. We believe the main points boil down to the following.

Token subspaces may become less important with larger models and deeper layers.
In wider SAEs, wasting some capacity on the token subspace doesn't matter.
Inductive bias should be avoided as it may affect interpretability or cheat metrics.
This may not work for attention SAEs, transcoding and MLPs.

While we believe all arguments have merit, we claim they are generally not as strong as one might think. The following are one-line counterarguments to each of them.

Token subspaces remain extremely prominent, even in later layers of Gemma 2B.
The community is not using SAEs with millions of features, we're still stuck at 25k.
Constraints are great for interpretability, we don't think we're cheating any metrics.
We currently have no real counter to this besides this is outside of our scope.

Token Subspace Importance

Our experiments show that context-aware embeddings bear considerable similarity to simple unigram embeddings, even in deeper models. This leads us to believe that the token subspace is universally the most important subspace towards reconstructing embeddings. While longer contexts and deeper models may dilute this subspace, we expect this to be generally true.

Wider SAEs

As stated before, the community generally doesn't have the computing power or storage capacity to train and use multi-million-feature SAEs. Even if SAEs remain the prominent direction in mechinterp, we do not believe this fact to change soon.

On a different note, the recent TopK Paper describes feature clustering results (Appendix 7), which indicate that large SAEs generally organize themselves into two main categories. They also note that this smaller cluster (about 25%) fires more strongly for select tokens while the other cluster fires more broadly. This is very closely related to what our analysis showed and what was the main motivation for TSAEs. We cautiously hypothesize that TSAEs may scale beyond our current results (potentially with some tweaks).

Inductive bias = bad

There are several ways that this concern can be formulated. It generally boils down to noting that a token-based lookup table constrains the SAE in a way that may be unhelpful or even counterproductive. It's generally hard to completely refute this argument since we can't check all possible scenarios. TSAEs can fail in two ways: bad metrics and bad feature quality.

Broadly speaking, inductive bias has played a large role in ML. Just as residuals assume that most computation is shallow and should be somewhat enforced, we assume certain features to be prominent. Along the same lines, inductive biases can play a role in interpretability research to simplify and constrain certain analysis methods.

Angel's Advocate

From experience, some important upsides are not immediately clear upon first hearing about TSAEs. This is a subjective list of less obvious advantages to our approach.

Lookup Table for Interpretability

TSAEs are incentivized to push anything token-related to the lookup table and anything context-related to the SAE. This results in a natural disentanglement of these concepts. Since the trigger is deterministic, there is no need to figure out what activates a feature. We simply get a bunch of clear and meaningful directions in latent space. This can be seen as an intermediate embedding table that may be more meaningful than the original embedding for circuit analysis.

Less confusing feature splitting

Feature splitting seems like a fact of life for SAEs, they can make features less interpretable and less useful for steering. TSAEs have the advantage that the pure dictionary features are much less likely to devolve to a concept but for specific tokens feature (eg. "the" in math context). The most common form of feature splitting will be more specific contexts/concepts, which we believe to be less harmful. We have not yet done a study into this claim.

Similar Work

The present work can be applied to any SAE architecture. Some recent sparse auto-encoder methods build specifically on TopK SAEs (Gao et al.):

BatchTopK (Bussmann et al.)
Switch SAE (Anish Mudide)

Other techniques can be used more generally. For example, researchers have explored alternative activation functions (e.g. JumpReLU, Rajamanoharan et al.) and loss functions (e.g. p-annealing, Karvonen et al.).

Conclusion

We showed that tokenized SAEs produce interesting features in a fraction of the training time of standard SAEs. We provided evidence the technique is likely to scale to larger models and trained some Pythia 1.4B TSAEs, which seemingly have good features. There are also additional avenues for future research. For example, potentially incorporating lookups for larger n-grams and more thoroughly investigating feature quality.

Lastly, we hope this study will ignite further research towards not simply scaling SAEs but making them more structured in interpretable ways.

^{^}
By default, we retain the BOS token for the simple reason that it has been found to be important in the role of attention sinking. Removing the BOS has been shown to break model performance in strange ways.
^{^}
Across ~38K 128-token prompts, we can measure the percentage when the last token unigram is most similar to the residuals, of all other unigrams. Surprisingly, this occurs >20% of the time across all layers and models tested. Here, Gemma 2B has ~256K tokens, while the others have ~52K. Also, we consider "nearby/near-exact" tokens to be when their string representation is identical following token.strip().lower() (in Python).
^{^}
We use the terminology "imbalance" because it accurately describes the expected effect -- bias toward particular over-represented classes. However, technically speaking this is best described as a "weighted regression class".
^{^}
Every input sequence [BOS, <tok1>, <tok2>, ...] results in training the SAE to reconstruct the representations of [BOS], [BOS, <tok1>], [BOS, <tok1>, <tok2>], etc. So, the SAE will see the [BOS] representation for every training example, while n-gram representations will follow the distribution of the n tokens in the training set.
^{^}
In RES-JB layer 8, we found that 76% of features are activated by a unigram. Of these, 39% matched the top unigram activation and 66% matched at least one.
^{^}
To show additional breadth, we have included some more features:
• 36: ”.\n[NUM].[NUM]”
• 40: Colon in the hour/minute ”[1-12]:”
• 1200: ends in ”([1-2 letters])”
• 1662: ”out of [NUM]”/”[NUM] by [NUM]”/”[NUM] of [NUM]”/”Rated [NUM]”/”[NUM] in [NUM]”
• 1635: credit/banks (bigrams/trigrams)
• 2167: ”Series/Class/Size/Stage/District/Year” [number/roman numerals/numeric text]
• 2308: punctuation/common tokens immediately following other punctuation
• 3527: [currency][number][optional comma][optional number].
• 3673: ” board”/” Board”/” Commission”/” Council”
• 5088: full names of famous people, particularly politicians
• 5552: ends in ”[proper noun(s)]([uppercase 1-2 letters][uppercase 1-2 letters]”
• 6085: ends in ”([NUM])”
• 6913: Comma inside parentheses
^{^}
It is important to note that current complexity methods are likely inexact. Feature activations may be caused by conjunctive factors which obscure their true basis, e.g. specific final tokens, sequence position, and repeated tokens/patterns from earlier in the prompt. For example, a feature that does not respond to unigrams (or overly responds to them) may simply have a strong positional bias. Separating these factors is complex and not a subject of this paper.
^{^}
Cunningham, H. and Connerly, T. Circuits updates - June 2024. Transformer Circuits Thread, 2024.
^{^}
SAE feature activations were stongly correlated with cosine similarity between the input vector and encoder weights. This follows directly from the encoder computation. A small feature activation implies a low cosine similarity, risking that the feature was activated by chance. It therefore seems advisable to set a minimum activation threshold for qualitative work. For a layer 8 TopK tokenized SAE:
^{^}
It generally doesn't matter if we scale either the encoder or decoder. This was just slightly simpler to notate. Note that some SAE variants force their decoder row norm to be 1, which would negate this initialization.
^{^}
Experiments are based on gpt2-small layer 8. It is sufficiently deep in the model that we would expect complex behavior to have arisen.
^{^}
The formulas are as follows:
$C E_{a d d e d} (x) = \frac{(C E_{p a t c h e d} (x) - C E_{c l e a n} (x))}{C E_{c l e a n} (x)}$
$N M S E (x) = \frac{| | x - SAE (x) | |_{2}}{| | x | |_{2}}$